| |
| IPBio-150 biometric fingerprint keypad lock is designed for convenience where keys are no longer required with IPBio-150 lock. The device has automatic locking to make you never leave your door unlocked again. IPBio-150 fingerprint’s sensor is activated automatically when you slide up the front cover. You only need to put your finger on the sensor for a second while the lock checks for your matching fingerprint template. Deletion of user individually is allowed with the correct password. You can even access the lock with a combination of password. IPBio-150 fingerprint door lock system is excellent for residential homes or commercial offices. |
| |
| MAIN FEATURES |
Fingerprint Sensor |
: |
Optical |
Number of Users |
: |
150 |
|
: |
78 |
Mode of Sensor Activation |
|
: |
Slide Cover |
| Deletion |
: |
Individually |
| Enrollment |
: |
Controlled by Password |
| Latch |
: |
Single Tubular Latch |
| Deadbolt |
: |
None |
| Key override |
: |
Yes |
| Key type |
: |
Regular, duplicable key |
| LCD display |
: |
No |
| Dust Cover |
: |
Yes |
| Reversible handle |
: |
No |
| Weatherproof |
: |
Yes |
| Standby Power Pole |
: |
No |
| Security Threshold |
: |
No |
| Audit Trail |
: |
No |
| Other Information |
: |
Good for exterior door |
| |
|
|
| DESCRIPTION |
|
|
| Fingerprint optical sensor |
: |
CMOS chip |
| Unlock |
: |
Fingerprint, PIN or key |
| Capacity |
: |
150 fingerprints |
| Password |
: |
78 PIN code max of 8 digits |
| Delete |
: |
64 user's fingerprints individually |
| Weatherproof |
: |
Can be used on exterior doors |
| Other info |
: |
Fingerprint data is intact even in case of power failure (battery dead) |
| |
: |
The sensor will activate when the slide is pushed up |
| |
: |
Auto-lock or open state capability |
| |
: |
Set to passage mode at any time |
| |
: |
Key override and exchangeable keycore |
| |
: |
Fit to most cylindrical locksets |
| |
: |
Heavy-duty construction design |
| |
: |
4 AA batteries for over 15,000 times in normal use |
| |
: |
Low voltage warning |
| |
: |
One year limited manufacturer's warranty |
| |
|
|
| SPECIFICATIONS |
|
|
| Resolution factor |
: |
560 dpi |
| Dimensions |
: |
7 7/16" X 3 5/8" |
| FAR (False Acceptance Rate) |
: |
Less than 0.00001% |
| Power supply |
: |
4 standard AA batteries |
| No external wiring required |
|
|
| Static consumption |
: |
< 40 uA |
| Dynamic consumption |
: |
100 mA - 400 mA |
| Operating humidity |
: |
20%-90% |
| Operating temperature |
: |
-4º to 140º F |
| Fit door thickness from 1.5" - 2.36" |
| Adjustable latch |
: |
2 3/8" or 2 3/4" backset |
| Fit a standard 2-1/8" diameter hole |
| Model |
: |
IPBio-150 |
| Color |
: |
Silver |
| |
|
|
| Special Installation Instructions |
| Please consider a minimum clearance of 5" above the lock-mounting hole to fit the sliding cover on the IPBio-150. Please ensure that this distance exists between the existing doorknob cutout and any existing deadbolt and/or trim! |
